Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Megatouch Aurora touchscreen issues  (Read 3816 times)

0 Members and 1 Guest are viewing this topic.

jcmg24

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 1
  • Last login:July 26, 2018, 11:28:58 am
  • I want to build my own arcade controls!
Megatouch Aurora touchscreen issues
« on: July 25, 2018, 12:35:23 pm »
Hello
Cant calibrate my Megatouch Aurora 19”, the cursor goes in another direction…. Need help




is there a Driver...... usb driver ?
« Last Edit: July 25, 2018, 12:51:39 pm by jcmg24 »

mahkeymike

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 747
  • Last login:Yesterday at 10:10:40 pm
Re: Megatouch Aurora touchscreen issues
« Reply #1 on: July 25, 2018, 03:22:51 pm »
That video was published almost 1 1/2 years ago and you are finally trying to fix it? ???

lilshawn

  • Moderator
  • Trade Count: (+3)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 7377
  • Last login:Yesterday at 07:40:39 pm
  • I break stuff...then fix it...sometimes
Re: Megatouch Aurora touchscreen issues
« Reply #2 on: July 25, 2018, 10:36:33 pm »
open front (2 allen screws on left and right top backside...security screw or nut on back middle top... #1 phillips on front top middle maquee) , remove monitor/overlay from front bezel (4 #2 phillips on left and right brackets) and tilt monitor up.

clean clean clean. 99% isopropyl.  make sure the gasket is intact and not touching plastic.

but it looks like a dead connection to a transducer.

in any case, if it still won't calibrate, you are looking at a new overlay.

http://parts.amientertainment.net/Products/?search=SB0533-01

mahkeymike

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 747
  • Last login:Yesterday at 10:10:40 pm
Re: Megatouch Aurora touchscreen issues
« Reply #3 on: July 25, 2018, 11:35:37 pm »
There is a lot of work involved in replaceing that overlay. I can replace the overlay and send you the monitor enclosure back ,if you don't want to tackle it yourself. You are looking at around $200 plus shipping. Consider that before you attempt it yourself, or decide to sell the machine. If you want to sell i am interested in that as well.

lilshawn

  • Moderator
  • Trade Count: (+3)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 7377
  • Last login:Yesterday at 07:40:39 pm
  • I break stuff...then fix it...sometimes
Re: Megatouch Aurora touchscreen issues
« Reply #4 on: July 26, 2018, 12:58:17 am »
There is a lot of work involved in replaceing that overlay.

yeah... a lot of cutting...without hacking into your LCD panel

you should try it busted... with huge razor sharp chunks that make the utility knife you are trying to cut it off with seem like a butter knife.

probably why often sold the LCD and overlay as a single FRU part...

http://parts.amientertainment.net/Products/?search=SA0608-01

but good luck with that price...  ::)